A335 SPECIFICATION_aluminum angles,lowes pipe

A335 SPECIFICATION

A335 SPECIFICATION | A335 DATA SHEET | A335 TECHNICAL DATA SHEET

A335 PIPE SPECIFICATIONS – A333 P5 | A333 P9 | A333 P11 | A333 P12 | A333 P22 | A333 P91

HSH China Manufacturer and fabricator, Importer, Stockholder, Exporter of A335 Grade P5 | P9 | P11 | P12 | P22 | P91 | P91 Alloy Steel Pipe premier suppliers of bulk A335 Grade P5 | P9 | P11 | P12 | P22 | P91 | P91 Alloy Steel Pipe stock worldwide. Fast delivery guaranteed for every size stainless steel A335 Chrome Moly Pipes; alloy steel pipe, largest range of AASTM A335 Pipe suppliers in India.

specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding

is a seamless ferritic Alloy-Steel Pipe for high temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Sometimes referred to as “P Grade”, chome moly pipe is popular in P-Grades P5, P9, P11, P22, and P91. The most common use of grades P11, P22, and P91 is in the power industry and petro-chemical plants, Grades P5 and P9 are commonly used in refineries

is often called chrome moly pipe because of the chemical makeup of Molybdenum (Mo) and Chromium (Cr). Molybdenum increases the strength of steel as well as the elastic limit, resistance to wear, impact qualities, and hardenability. Moly increases the resistance to softening, restrains grain growth and makes chromium steel less susceptible to embrittlement. Moly is the most effective single additive that increases high temperature creep strength. It also enhances the corrosion resistance of steel, and inhibits pitting. Chromium (or chrome) is the essential constituent of stainless steel. Any steel with 12% or more Chrome is considered stainless. Chrome is virtually irreplaceable in resisting oxidation at elevated temperatures. Chrome raises the tensile, yield, and hardness at room temperatures. The composition chrome moly alloy steel pipe make it ideal for use in power plants, refineries, petro chemical plants, and oil field services where fluids and gases are transported at extremely high temperatures and pressures.

Prosaic Steel Supply stocks a full range of the following A335 pipe grades:

Grades: P-5, P-9, P-11, P-12, P-22, and P-91

Sizes

NPS 1/4” to NPS 48”

Wall Thickness – Schedules 40 through 160, STD, XS, XXS.

Unscheduled heavy wall pipe thicknesses available up to 4 inches.

Alloy Steel Seamless Pipes (IBR APPROVED)
Alloy Steel Seamless Pipes (IBR) offered by us is made of alloy steel and feature exceptional performance properties. These are developed for energy-related applications involving oil & gas drilling and therefore are subjected to stresses in machine parts. Further, Alloy Steel Tubes are also used in domestic, professional or industrial areas. Alloy Steel Seamless Pipes (ASME SA335 Grade P5)
Alloy Steel Seamless Pipes (ASME SA335 Grade P5) offered by us are made available in ASME SA335 as well as P1, P5, P9, P11, P12, P91 grades. Our expertise lies in offering these in different sizes & schedules, with IBR & latest edition NACE MR 0175 reports.
ASME Alloy Steel Seamless Tubes/ Pipes (SA335 Grade P9)

ASME Alloy Steel Seamless Tubes/ Pipes (SA335 Grade P9) manufactured, supplied and exported by us are used for various industrial applications. Our specialization in offering precision engineered alloy steels allow us to deliver these for various engineering applications in various grades like A-387 GR. P1, P5, P9, P11, P12, P22, P91, ASTM A-335 and others. The other specifications include:

Alloy Steel Pipes (ASTM A335 P11)
Alloy Steel Pipes (ASTM A335 P11) offered by us are made as per IBR standards and are used mainly for boiler operations. We source these seamless pipes in varied size range. Further, we can also get these customized as per boiler piping requirements. For ensuring in them optimum quality standards, we source these from quality manufacturers. We also offer clients of having their own mark on them.

Alloy Steel Pipes (ASTM A335 P12)
Alloy Steel Pipes (ASTM A335 P12) offered by us are available with ASTM A335 P12 standard and finds application in industries like Petrochemicals, Refineries, Fertilizers, Pharmaceuticals and others. We can source these seamless pipes in size range of up to 26 inches.

Alloy Seamless Pipes (ASTM A335 Grade P91 NACE)
Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) offered by us are made available in ASTM A335 Grades. Made as per IBR standards, these are mainly used in boiler operations. Further, our expertise lies in offering these pipes in various size range as well as in customized parameters as per boiler piping requirements. Sourced from quality conscious manufacturers, we also offer our clients the option of adding their own mark on them.

Heat Treatment Requirements of Alloy Steel Seamless Pipes

P5, P9, P11 and P22
Grade Heat Treatment Type Normalizing Temperature Range F [C] Subcritical Annealing
or Tempering 
Temperature Range F
[C]
P5 (b,c) Full or Isothermal Anneal
Normalize and Temper ***** 1250 [675]
Subcritical Anneal (P5c only) ***** 1325 – 1375 [715 – 745]
P9 Full or Isothermal Anneal
Normalize and Temper ***** 1250 [675]
P11 Full or Isothermal Anneal
Normalize and Temper ***** 1200 [650]
P22 Full or Isothermal Anneal
Normalize and Temper ***** 1250 [675]
P91 Normalize and Temper 1900-1975 [1040 – 1080] 1350-1470 [730 – 800]
Quench and Temper 1900-1975 [1040 – 1080] 1350-1470 [730 – 800]

Chemical Requirements of Alloy Steel Seamless Pipes

Grade P-5 P-9 P-11 P-22 P-91 P-91 shall also include the following:
Element UNS Designation K41545 S50400 K11597 K21590 K91560
Carbon 0.15 max 0.15 max 0.05 – 0.15 0.05 – 0.15 0.08 – 0.12 V at 0.18 – 0.25
Manganese 0.30 – 0.60 0.30 – 0.60 0.30 – 0.60 0.30 – 0.60 0.30 – 0.60 N at 0.030 – 0.070
Phosphorous, max 0.025 0.025 0.025 0.025 0.020 Ni at 0.40 max
Sulfur, max 0.025 0.025 0.025 0.025 0.010 Al at 0.02 max
Silicon 0.50 max 0.25 – 1.00 0.50 – 1.00 0.50 max 0.20 -0.50 Cb at 0.06 – 0.10
Chromium 4.00 – 6.00 8.00 – 10.00 1.00 – 1.50 1.90 – 2.60 8.00 – 9.50 Ti at 0.01 max
Molybdenum 0.45 -0.65 0.90 – 1.10 0.44 – 0.65 0.87 – 1.13 0.85 – 1.05 Zr at 0.01 max

Tensile Requirements of Alloy Steel Seamless Pipes

Seamless
P-5 P-9 P-11 P-22 P-91 P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC].
Tensile Strength, min., psi
ksi 60 60 60 60 85
MPa 415 415 415 415 585
Yield Strength, min., psi
ksi 30 30 30 30 60
MPa 205 205 205 205 415

Permissible Variation in Wall Thickness of Alloy Steel Seamless Pipes

NPS [DN] Designator Tolerance, % from Specified
Over Under
1/8 to 2 1/2 [6 to 65] incl., all t/D ratios 20.0% 12.5%
Above 2 1/2  [65], t/D < or = 5% 22.5% 12.5%
Above 2 1/2  [65], t/D > 5% 15.0% 12.5%
(t = Specified Wall Thickness; D = Specified Outside Diameter)    

Elongation Requirements of Alloy Steel Seamless Pipes

Calculated Minimum Elongation Values
Elongation in 2 in. or 50 mm, min %
Wall Thickness P5, P9, P11, P22 P91
in. mm Longitudinal Transverse Longitudinal
5/16 (0.312) 8 30 20 20
9/32 (0.281) 7.2 28 19 19
1/4 (0.250) 6.4 27 18 18
7/32 (0.219) 5.6 26 17
3/16 (0.188) 4.8 24 16
5/32 (0.156) 4 22 15
7/8 (0.125) 3.2 21 14
3/32 (0.094) 2.4 20 13
1/18 (0.062) 1.6 18 12

Permissible Variations in Outside Diameter of Alloy Steel Seamless Pipes Outside Diameter at any point shall not vary from standard specified more than:

NPS [DN] Designator Over Under
  in. mm in. mm
1/8 to 1 1/2 [6 to 40], incl. 1/64 (0.015) 0.40 1/64 (0.015) 0.40
Over 1 1/2 to 4 [40 to 100], incl. 1/32 (0.031) 0.79 1/32 (0.031) 0.79
Over 4 to 8 [100 to 200], incl. 1/16 (0.062) 1.59 1/32 (0.031) 0.79
Over 8 to 12 [200 to 300], incl. 3/32 (0.093) 2.38 1/32 (0.031) 0.79
Over 12 [300] +/- 1% of the specified outside diameter

Mechanical Tests Specified for A335 Alloy Steel Seamless Pipes

Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot.  For small lots, at least one pipe shall be tested.
For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Hardness Test: P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC].
Notes for Bend Test: For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.
The inside diameter of the bend shall be 1 inch [25 mm].
Hydrostatic Test Each length of pipe shall be Hydro tested, at option of manufacture nondestructive electric testing can be used.

Chemical Composition of Other Grades of Specification A335

Grade UNS C≤ Mn P≤ S≤ Si≤ Cr Mo
P1 K11522 0.10~0.20 0.30~0.80 0.025 0.025 0.10~0.50 0.44~0.65
P2 K11547 0.10~0.20 0.30~0.61 0.025 0.025 0.10~0.30 0.50~0.81 0.44~0.65
P5 K41545 0.15 0.30~0.60 0.025 0.025 0.50 4.00~6.00 0.44~0.65
P5b K51545 0.15 0.30~0.60 0.025 0.025 1.00~2.00 4.00~6.00 0.44~0.65
P5c K41245 0.12 0.30~0.60 0.025 0.025 0.50 4.00~6.00 0.44~0.65
P9 S50400 0.15 0.30~0.60 0.025 0.025 0.50~1.00 8.00~10.00 0.44~0.65
P11 K11597 0.05~0.15 0.30~0.61 0.025 0.025 0.50~1.00 1.00~1.50 0.44~0.65
P12 K11562 0.05~0.15 0.30~0.60 0.025 0.025 0.50 0.80~1.25 0.44~0.65
P15 K11578 0.05~0.15 0.30~0.60 0.025 0.025 1.15~1.65 0.44~0.65
P21 K31545 0.05~0.15 0.30~0.60 0.025 0.025 0.50 2.65~3.35 0.80~1.60
P22 K21590 0.05~0.15 0.30~0.60 0.025 0.025 0.50 1.90~2.60 0.87~1.13
P91 K91560 0.08~0.12 0.30~0.60 0.020 0.010 0.20~0.50 8.00~9.50 0.85~1.05
P92 K92460 0.07~0.13 0.30~0.60 0.020 0.010 0.50 8.50~9.50 0.30~0.60

Note: (S)A335 P91 other chemical composition are : V 0.18~0.25; N 0.030~0.070; Ni ≤ 0.40; Al ≤ 0.04 ; Nb 0.06~0.10
(S)A335 P92 other chemical composition are : V 0.15~0.25; N 0.030~0.070; Ni ≤ 0.40; Al ≤ 0.04 ; Nb 0.04~0.09; W 1.5~2.00 ; B 0.001~0.006

Required Markings on Each Length

(On Tags attached to each Bundle in case of Bundled Pipe) Markings will adhere to prescribed specifications in A 999/A999M and be: Rolled, Stamped, or Stenciled (Mfrs. Option)

In addition, markings will include:
Length of Pipe
Marking to indicate the test method(s)
Hydrostatic Nondestructive Marking
YES NO Test Pressure
NO YES NDE
NO NO NH
YES YES Test Pressure/NDE
Schedule Number
Heat Number or Manufacturer’s number by which heat can be identified
An Additional Symbol “S” if the pipe conforms to any Supplementary Requirements
S1 – Product Analysis
S2 – Transverse Tension Test
S3 – Flattening Test
S4 – Metal Structure and Etching Tests
S5 – Photomicrographs
S6 – Photomicrographs for Individual Pieces
S7 – Alternative Heat Treatment – Grade P91
Pipe that has been weld repaired shall be marked “WR”.

Reference Documents

  • ASTM A999/A 999M Specification for General requirements for Alloy and Stainless Steel Pipe.
  • ASTM E 213 Practice for Ultrasonic Examination of metal Pipe and Tubing
  • ASTM E 309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
  • ASTM E 381 Method of Macroetch testing Steel Bars, Billets, Blooms, and Forgings
  • ASTM E 570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
  • ASME B26.10M Welded and Seamless Wrought Steel Pipe

Ordering Information

Orders for material under this specification should include the following, as required, to describe the desired material adequately:

Quantity Feet, meters, or number of lengths
Name of material Seamless Alloy Steel Pipe
Grade P5, P9, P11, P22, P91
Manufacturer Hot-finished or cold-drawn
Size using one of the following:
NPS and Schedule Number
Outside Diameter and Nominal Wall Thickness
Outside Diameter and Minimum Wall Thickness
Inside Diameter and Nominal Wall Thickness
Inside Diameter and Minimum Wall Thickness
Length Specific or Random
End Finish

A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube Packing

A335 Grade P5, P9, P11, P12, P22, P91 Alloy Steel Seamless Pipe and Tube is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation.

A335 Grade P5, P9, P11, P12, P22, P91 Alloy Steel Seamless Pipe packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery: Within 10-25 days or asap if we have enough stock

Types of Packaging:

  • – Bundles (hexagonal)
  • – Wooden Boxes
  • – Crates (steel/wooden)
  • – Special crates for U-Bend tubes with each radius separated
  • – Packaging for A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe as per customer’s requirements

Special Features:

  • – Each bundle covered with plastic for protection against extreme weather.
  • – End of A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe protected by plastic caps.
  • – Bundles strapped with plastic strips.
  • – Each radius of U-Bend tube separated by a separator.
  • – Packaging list (laminated) placed with box/crate.

A335 Grade P5, P9, P11, P12, P22, P91 Alloy Steel Seamless Pipe Price List


  • US $600-1200 / Ton ( FOB Price)
  • US $650-900 / Ton ( FOB Price)
  • US $600-700 / Long Ton ( FOB Price)
  • US $0-1000 / Ton ( FOB Price)
  • US $100000-30000000 / Unit ( FOB Price)
  • US $588-1058 / Ton ( FOB Price)
  • US $650-900 / Ton ( FOB Price)
  • US $500-1000 / Piece ( FOB Price)
  • US $500-900 / Ton ( FOB Price)

ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube Sizes Available in Stock with Price

  • 1/2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 3/4″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 1″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 1-1/4″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 1-1/2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 2-1/2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 3″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 3-1/2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 4″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 5″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 6″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 8″ NB in ThicknessSchedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 10″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 12″ NB in ThicknessSchedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 14″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 16″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 18″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 20″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 22″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 24″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 26″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 28″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 30″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 32″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 34″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
  • 36″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube

We export ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East etc.

HSH is a well known worldwide exporter of ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe, HSH is committed to provide each and every customer with the highest standard of customer service. We deals in in India & Overseas, offering a wide range of ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube

HSH is Leading Manufacturer, Distributor, Exporter, Stockholder and Supplier of ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe in Unites States of America (USA), Saudi Arabia, Iran, Iraq, United Arab Emirates (UAE), Singapore, Malaysia, Indonesia

HSH stocks a broad range of metal materials, including aluminum, steel, stainless steel, copper and brass, and specialty metals. Also, we also sell cast fittings, cast Iron, forged fittings, cutting tools, flanges, ect. If you have any needs about our products, you can contact us.
sales@https://www.metal-pipe.com