cast aluminum,black iron pipe_316Ti Stainless Steel Pipes and Tubes ( UNS S31609 – Seamless / Welded / ERW / EFW)

316Ti Stainless Steel Pipes and Tubes ( UNS S31609 – Seamless / Welded / ERW / EFW)

316Ti Stainless Steel Seamless Pipe | 316Ti Stainless Steel Seamless Tube

Prosaic Steel & Alloys offers 316Ti Stainless Steel Seamless Pipe & Tube as per ASTM A213/312 | 316Ti Stainless Steel ERW Pipe & Tubes as per ASTM A249/312

HSH is 316Ti Stainless Steel Seamless Pipe and Tube Manufacturer, Stockholder, Suppliers, Distributors and Exporter in India

is a titanium stabilised version of 316 molybdenum-bearing austenitic stainless steel. The 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. High carbon Alloy 316 stainless steel can be susceptible to sensitisation, the formation of grain boundary chromium carbides at temperatures between approximately 900 and 1500°F (425 to 815°C) which can result in intergranular corrosion. Resistance to sensitisation is achieved in Alloy 316Ti with titanium additions to stabilise the structure against chromium carbide precipitation, which is the source of sensitisation. This stabilisation is achieved by an intermediate temperature heat treatment, during which the titanium reacts with carbon to form titanium carbides. This significantly reduces susceptibility to sensitisation in service by limiting the formation of chromium carbides. Thus, the alloy can be used for extended periods at elevated temperatures without compromising its corrosion resistance. 316Ti has equvilent corrosion resistance to sensitisation as the low carbon version 316L.

Benefits of using Type 316Ti Stainless Steel

  • Low carbon content eliminates carbon precipitation in the welding process
  • Can be used in severe corrosive environments
  • Improved anti-corrosion scope due to added Molybdenum
  • Weld annealing only required in high stress applications
  • Very similar to Grade 316 in chemical composition and mechanical properties

Grade 316Ti stainless steel has been traditionally specified by German engineers and users with the Werkstoff number 1.4571.The former steel grade in the UK was 320S31.

This grade is essentially a standard carbon 316 type with titanium stabilisation and is similar in principle to the titanium stabilisation of the 304 (1.4301) type to produce 321 (1.4541). The addition of titanium is made to reduce the risk of intergranular corrosion (IC) following heating in the temperature range 425-815C.

Product Range

Specifications: ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790
Sizes (Seamless): 1/2″ NB – 24″ NB
Sizes (ERW): 1/2″ NB – 24″ NB
Sizes (EFW): 6″ NB – 100″ NB

Wall Thickness available:
Schedule 5S – Schedule XXS (heavier on request)

Other Materials Testing:

NACE MR0175, H2 SERVICE, OXYGEN SERVICE, CRYO SERVICE, etc.

Dimensions:

All Pipes is manufactured and inspected/tested to the relevant standards including ASTM, ASME and API etc.

Background of 316Ti Stainless Steel Pipes

When austenitic stainless steels are subject to prolonged heating in the temperature range 425-815C, the carbon in the steel diffuses to the grain boundaries and precipitates chromium carbide. This removes chromium from the solid solution and leaves a lower chromium content adjacent to the grain boundaries. Steels in this condition are termed ‘sensitised’. The grain boundaries become prone to preferential atack on subsequent exposure to a corrosive environment. This type of corrosion is known as intergranular corrosion (IC), also known in the past as ‘weld decay’.

The addition of titanium reduces the risk of IC since titanium carbo-nitrides are formed in preference to chromium carbides which has the effect of maintaining the correct distribution of chromium throughout the structure of the steel. The result is that areas adjacent to grain boundaries, where the carbo-nitrides form, is not depleted of chromium to a level at which localised corrosion can occur in the grain boundary area.

The alternative approach to reducing the risk of IC attack is to reduce the carbon level to below 0.03%. In this way a grade of 316 is produced with, in practice, the same resistance to IC as 316Ti (320S31/1.4571). This is the basis of the 316L types (316S11/1.4404 and 316S13/1.4432).

Composition of 316L Stainless Steel Pipes

Table 1. Composition ranges for 316Ti grade of stainless steels.

Grade
 
C
Si
Mn
P
S
Cr
Mo
N
Fe
Ni
Ti 316Ti Min – – – – – 16.0 2.00 – Balance 10 5x%(C+N) Max 0.08 0.75 2 0.45 0.03 18 3.00 0.1 Balance 14 5x%(C+N)

Mechanical Properties of 316Ti Stainless Steel Pipes
Table 2. Mechanical properties of 316Ti grade stainless steels.

Grade Tensile Str
(MPa) min
Yield Str
0.2% Proof
(MPa) min
Elong
(% in 50mm) min
Hardness
Rockwell B (HR B) max Brinell(HB) max
316Ti 515 205 35 95 217

Note: 316H also has a requirement for a grain size of ASTM no. 7 or coarser.

Physical Properties of 316L Stainless Steel Pipes
Table 3. Typical physical properties for 316 grade stainless steels.

Grade Density
(kg/m3)
Elastic Modulus
(GPa)
Mean Co-eff of Thermal Expansion (m/m/0C) Thermal Conductivity
(W/m.K)
Specific Heat 0-1000C
(J/kg.K)
ElecResistivity
(nΩ.m)
0-1000C 0-3150C 0-5380C At 1000C At 5000C
316/L/H 8000 193 15.9 16.2 17.5 16.3 21.5 500 740

Grade Specification Comparison of 316Ti Stainless Steel Pipes
Table 4. Grade specifications for 316 grade stainless steels.

Grade UNS
No
Old British Euronorm Swedish
SS
Japanese
JIS
BS En No Name
316 S31600 316S31 58H, 58J 1.4401 X5CrNiMo17-12-2 2347 SUS 316
316L S31603 316S11 1.4404 X2CrNiMo17-12-2 2348 SUS 316L
316H S31609 316S51

Note: These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Corrosion Resistance of 316Ti Stainless Steel Pipes

There is also some evidence that the 1.4571 type may have inferior pitting and stress corrosion cracking resistance, compared to the 1.4404 / 1.4432 types, although the general corrosion resistance can be assumed to be generally similar. The titanium stabilised 1.4571 grade may also be prone to ‘knife line attack’ in the heat-affected zones of welds, very close to the fusion zone where the carbo-nitrides have redissolved in the solid steel matrix.0C.

Heat Treatment of 316Ti Stainless Steel Pipes

Solution Treatment (Annealing) – Heat to 1010-11200C and cool rapidly. These grades cannot be hardened by thermal treatment.

316Ti Stainless Steel Pipe Packing

316Ti Stainless Steel Seamless Pipes and Tubes is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. SS 316Ti ASTM A312 Seamless Pipe packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery: Within 10-25 days or asap if we have enough stock

Types of Packaging:

  • – Bundles (hexagonal)
  • – Wooden Boxes
  • – Crates (steel/wooden)
  • – Special crates for U-Bend tubes with each radius separated
  • – Packaging for SS 316L ASTM A312 Seamless Pipe as per customer’s requirements

Special Features:

  • – Each bundle covered with plastic for protection against extreme weather.
  • – End of SS 316Ti ASTM A312 Seamless Pipe protected by plastic caps.
  • – Bundles strapped with plastic strips.
  • – Each radius of U-Bend tube separated by a separator.
  • – Packaging list (laminated) placed with box/crate.

316Ti Stainless Steel Seamless Pipe Sizes Available in Stock with Price

  • 1/2″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 3/4″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 1″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 1-1/4″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 1-1/2″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 2″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 2-1/2″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 3″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 3-1/2″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 4″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 5″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 6″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 8″ NB in ThicknessSchedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 10″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 12″ NB in ThicknessSchedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 14″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 16″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 18″ NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS

316Ti Stainless Steel Seamless Tube Sizes in Thickness SWG/BWG Available in Stock with Price

  • 1/4″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 5/16″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3/8″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1/2″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3/4″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1-1/4″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1-1/2″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1-3/4″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2-1/4″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2-1/2″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2-3/4″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3-1/2″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 4″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 4-1/2″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 5″ OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge

Are you Looking for a Reliable Source for Buying 316Ti Stainless Steel Pipes

HSH offer Great Discount on High Quality 316Ti Stainless Steel Pipes

We export 316Ti Stainless Steel Seamless Pipe to Iran, Iraq, Oman, Qatar, Albania, Muscat, Bahrain, Turkey, Egypt, Maldives, Italy, UAE, Bahrain, Indonesia, Australia, Kuwait, Saudi Arabia, South Africa, Germany, UK, Denmark, Canada, USA, Peru, Brazil, Nizeria, Mexico, Venezuela (Latin America), South America, Russia, kazakhstan etc.

HSH is a well known worldwide exporter of HSH the highly acclaimed exporter 316Ti Stainless Steel Seamless Pipes, HSH is committed to provide each and every customer with the highest standard of customer service. We deals in in India & Overseas, offering a wide range of 316Ti Stainless Steel Seamless Pipes.

HSH stocks a broad range of metal materials, including aluminum, steel, stainless steel, copper and brass, and specialty metals. Also, we also sell cast fittings, cast Iron, forged fittings, cutting tools, flanges, ect. If you have any needs about our products, you can contact us.
sales@https://www.metal-pipe.com

Shopping Cart