Concept And Specification Of Boiler Pipe
1. The concept of boiler pipe
The boiler tube is a kind of seamless tube. The manufacturing method is the same as that of seamless pipes, but there are strict requirements on the steel grades used in the manufacture of steel pipes. According to the operating temperature, it can be divided into two types: general boiler tubes and high-pressure boiler tubes.
The mechanical properties of the boiler tube is an important index to ensure the final use performance (mechanical properties) of the steel, and it depends on the chemical composition of the steel and the heat treatment system. In the steel pipe standard, according to different application requirements, the tensile properties (tensile strength, yield strength or yield point, elongation), hardness, toughness indicators, and high and low temperature properties required by users are specified.
①Generally, the temperature of boiler tubes is below 350℃. Domestic tubes are mainly made of No. 10 and No. 20 carbon steel hot-rolled tubes or cold-drawn tubes.
②High-pressure boiler tubes are often in high temperature and high pressure conditions when they are used. The tubes will be oxidized and corroded under the action of high-temperature flue gas and water vapor. The steel pipe is required to have high durable strength, high oxidation and corrosion resistance, and good organizational stability.
2. The purpose of boiler pipe
①General boiler tubes are mainly used to make water wall tubes, boiling water tubes, superheated steam tubes, superheated steam tubes for locomotive boilers, large and small smoke tubes and arched brick tubes.
②High-pressure boiler tubes are mainly used to manufacture superheater tubes, reheater tubes, air guide tubes, main steam tubes, etc. of high-pressure and ultra-high-pressure boilers. The supply and demand trend of the high-pressure boiler tube industry is generally stable, but the supply and demand situation of each specific sub-industry will be further differentiated. Insiders pointed out that the most critical link is the use and promotion of new energy-saving insulation 20g high-pressure boiler tube equipment.
New energy-saving 20g high-pressure boiler tube products are gradually increasing in the market, such as green paint, energy-saving water-saving sanitary products, environmentally friendly stone, environmentally friendly external cement foam insulation board, etc., energy-saving and environmentally friendly products in the broad market of 20g high-pressure boiler tube industry The medium-term prospects are promising.
3. Boiler tube specification table
specification | specification | specification | specification |
14*3 | 38*5.5 | 89*5 | 133*18 |
14*3.5 | 42*3 | 89*5.5 | 159*6 |
14*4 | 42*3.5 | 89*6 | 159*6.5 |
16*3 | 42*4 | 89*7 | 159*7 |
18*2 | 42*5 | 89*7.5 | 159*8 |
18*3 | 42*6 | 89*8 | 159*9.5 |
18*4 | 42*8 | 89*9 | 159*10 |
18*5 | 45*3 | 89*10 | 159*12 |
19*2 | 45*4 | 89*11 | 159*14 |
21*4 | 45*5 | 89*12 | 159*16 |
22*2.5 | 45*6 | 108*4.5 | 159*18 |
22*3 | 45*7 | 108*5 | 159*20 |
22*4 | 48*4 | 108*6 | 159*28 |
22*5 | 48*4.5 | 108*7 | 168*6 |
25*2.5 | 48*5 | 108*8 | 168*7 |
25*3 | 48*6 | 108*9 | 168*8 |
25*4 | 48*7 | 108*10 | 168*9.5 |
25*5 | 48.3*12.5 | 108*12 | 168*10 |
25*5.5 | 51*3 | 108*14 | 168*11 |
27*3.5 | 51*3.5 | 108*15 | 168*12 |
27*4 | 51*4 | 108*16 | 168*14 |
27*5 | 51*5 | 108*20 | 168*15 |
27*5.5 | 51*6 | 114*5 | 168*16 |
28*2.5 | 57*4 | 114*6 | 168*18 |
28*3 | 57*5 | 114*7 | 168*20 |
28*3.5 | 57*5.5 | 114*8 | 168*22 |
28*4 | 57*6 | 114*8.5 | 168*25 |
30*2.5 | 60*4 | 114*9 | 168*28 |
32*2.5 | 60*4 | 114*10 | 180*10 |
32*3 | 60*5 | 114*11 | 194*10 |
32*3.5 | 60*6 | 114*12 | 194*12 |
32*4 | 60*7 | 114*13 | 194*14 |
32*4.5 | 60*8 | 114*14 | 194*16 |
32*5 | 60*9 | 114*16 | 194*18 |
34*3 | 60*10 | 114*18 | 194*20 |
34*4 | 76*4.5 | 133*5 | 194*26 |
34*4.5 | 76*5 | 133*6 | 219*6.5 |
34*5 | 76*6 | 133*7 | 219*7 |
34*6.5 | 76*7 | 133*8 | 219*8 |
38*3 | 76*8 | 133*10 | 219*9 |
38*3.5 | 76*9 | 133*12 | 219*10 |
38*4 | 76*10 | 133*13 | 219*12 |
38*4.5 | 89*4 | 133*14 | 219*13 |
38*5 | 89*4.5 | 133*16 | 219*14 |
219*16 | 273*36 | 356*28 | 426*12 |
219*18 | 273*40 | 356*36 | 426*13 |
219*20 | 273*42 | 377*9 | 426*14 |
219*22 | 273*45 | 377*10 | 426*17 |
219*24 | 298.5*36 | 377*12 | 426*20 |
219*25 | 325*8 | 377*14 | 426*22 |
219*26 | 325*9 | 377*15 | 426*30 |
219*28 | 325*10 | 377*16 | 426*36 |
219*30 | 325*11 | 377*18 | 426*40 |
219*32 | 325*12 | 377*20 | 426*50 |
219*35 | 325*13 | 377*22 | 457*9.5 |
219*38 | 325*14 | 377*25 | 457*14 |
273*7 | 325*15 | 377*32 | 457*16 |
273*8 | 325*16 | 377*36 | 457*19 |
273*9 | 325*17 | 377*40 | 457*24 |
273*9.5 | 325*18 | 377*45 | 457*65 |
273*10 | 325*20 | 377*50 | 508*13 |
273*11 | 325*22 | 406*9.5 | 508*16 |
273*12 | 325*23 | 406*11 | 508*20 |
273*13 | 325*25 | 406*13 | 508*22 |
273*15 | 325*28 | 406*17 | 558.8*14 |
273*16 | 325*30 | 406*22 | 530*13 |
273*18 | 325*32 | 406*32 | 530*20 |
273*20 | 325*36 | 406*36 | 570*12.5 |
273*22 | 325*40 | 406*40 | 610*13 |
273*25 | 325*45 | 406*55 | 610*18 |
273*28 | 356*9.5 | 406.4*50 | 610*78 |
273*30 | 356*12 | 406.4*55 | 624*14.2 |
273*32 | 356*15 | 406*60 | 824*16.5 |
273*35 | 356*19 | 406*65 | 824*20 |
HSH stocks a broad range of metal materials, including aluminum, steel, stainless steel, copper and brass, and specialty metals. Also, we also sell cast fittings, cast Iron, forged fittings, cutting tools, flanges, ect. If you have any needs or questions, you can contact us.